ADVANCED High Speed Doors

High speed doors are designed to give rapid automatic opening and self closing operation, this is to provide heat or cooling retention to a door opening.

Each door is custom made from a flexible material which either rolls or folds upwards and accommodates high usage which is common with this type of door.

These doors are not designed with security in mind and should be used in conjunction with a more suitable door on external applications.

Options

The door can be operated by means of push buttons, radio control, infra red, motion detection or induction loops mounted in the floor.

ADVANCED High Speed Door – S1

ADVANCED High Speed Door – S3

ADVANCED High Speed Door – K1

HighSpeed6

HighSpeed2

Eagle 1

  • SEE DETAIL

    High Speed Flexible Roll-Up Door.

    Specification: –

    The door guides are constructed from specially extruded aluminium sections with nylon wear strips. The curtain is constructed from a multi-layer, UV-protected, highly durable, wear resistant, “rip stop” PVC fabric, which creates an efficient insulating barrier.

    The curtain is supported from an aluminium drum supported between galvanised steel endplates, running in high quality self aligning bearings. The door curtain runs within the two guides to give good airtight sealing. Wind anchors are fixed to the curtain that run inside the door guides.

    Each door is supplied with a safety photo-cell at low level and a wireless safety edge (to prevent the door from closing onto an obstruction). The control panel has an LCD, control buttons and emergency stop. It is constructed from nickel chromium plated stainless steel and contains a variable speed driver allowing speed adjustment between 0.3m/sec and 1.5m/sec.

    Operation: –

    Electrical operation is by means of high quality three phase motor and gearbox, incorporating integral limits and safety brake. All controls are low voltage and have open, close and emergency stop buttons as standard.

    Please Note: –

    Client to provide a low level 3 phase, Neutral & Earth Isolator (20 amp) positioned within one metre of final control panel location.

    Operating Speed: –

    0.3m/sec to 1.5m/sec.

  • SEE DETAIL

    High Speed Flexible Fold-Up Door.

    Specification: –

    The frame consists of a hollow U-shaped horizontal beam that envelopes the mechanism, and two U-shaped support posts all manufactured from galvanised steel.

    The curtain is constructed from a multi-layer, UV-protected, highly durable, wear resistant, “rip stop” PVC fabric, which creates an efficient insulating barrier. The curtain is supported from a drum housed in the horizontal beam. The door curtain runs within the two support posts to give good airtight sealing.

    Each door is supplied with a safety photo-cell at low level and a wireless safety edge (to prevent the door from closing onto an obstruction). The control panel has an LCD, control buttons and emergency stop. It is constructed from nickel chromium plated stainless steel and contains a variable speed driver allowing speed adjustment between 0.3m/sec and 1.2m/sec.

    Operation: –

    Electrical operation is by means of high quality three phase motor and gearbox, incorporating integral limits and safety brake. All controls are low voltage and have open, close and emergency stop buttons as standard.

    Please Note: –

    Client to provide a low level 3 phase, Neutral & Earth Isolator (20 amp) positioned within one metre of final control panel location.

    Operating Speed: –

    0.3m/sec to 1.5m/sec.

  • SEE DETAIL

    High Speed Self Repairing Roll-Up Door.

    Specification: –

    The door guides are constructed from specially extruded aluminium sections / steel with nylon wear strips. The curtain is constructed from a multi-layer, UV-protected, highly durable, wear resistant, “rip stop” PVC fabric, which creates an efficient insulating barrier. Flexible bars are integrated into the shutter curtain to give greater wind resistance. The curtain is supported from an aluminium drum supported between galvanised steel endplates, running in high quality self aligning bearings. The door curtain runs within the two guides to give good airtight sealing.

    The most important feature of the door is the strong and flexible curtain system, where at the location of an accidental hit it is derailed and then automatically self realigns without the need for service. In this way, the traffic flow and production is not interrupted and the requirement for costly repairs and maintenance are minimized. Drum and motor covers are as standard with all “Celeritas Eagle” Doors.

    Each door is supplied with a safety photo-cell at low level and a wireless safety edge (to prevent the door from closing onto an obstruction). The control panel has an LCD, control buttons and emergency stop. It is constructed from nickel chromium plated stainless steel and contains a variable speed driver allowing speed adjustment between 0.9m/sec and 1.3m/sec.

    Operation: –

    Electrical operation is by means of high quality motor and gearbox, incorporating integral limits. All controls are low voltage and have open, close and emergency stop buttons as standard.

    Operating Speed: –

    0.9m/sec to 1.3m/sec.

For more information and specific detail for your facilities and building please contact us using the simple form below or call ADVANCED on 01484 861112