'Thermalath Star' - Insulated Roller Shutter Door

Specification:-

• 'Thermalath Star II' Hand Chain Operation.
• 'Thermalath Star III' Electrical Operation (3ph or 1ph).

The shutter curtain is constructed from suitable interlocking twin skin galvanised steel laths, in-filled with polystyrene, running in galvanised steel side channels, mounted on mild steel support angles which are bolted to the structure. The curtain weight is supported from a suitable steel tube barrel assembly at high level, running on steel bearings. The barrel assembly is supported between mild steel endplates. A rubber seal is provided to the bottom edge of door and a nylon brush seal to the door head. All mild steel components are finished in one coat of black primer.

Operation:-

Manual operation is by means of a continuous galvanised haul chain, through single or double reduction gearing. These doors are fitted with helically wound counter balance springs, fitted within the barrel assembly, to assist in operation. Each door is fitted with an anti fall-back safety device which prevents accidental dropping of the door curtain.

Electrical operation is by means of high quality three phase motor, gearbox and integral safety device incorporating six integral limits. The safety device prevents accidental dropping of the door curtain. All controls are low voltage and have open, close and emergency stop buttons as standard. Emergency manual over ride is provided as standard to allow operation of the door in case of power failure.

Application:-

Each door is purpose-made to suit site dimensions and requirements and is suitable for all types of industrial use where insulation to a value of 0.7W/m²K is required.

Classification:-

Under BS 13241-1, classifications are given to each door with regards to Wind Resistance, Water Resistance, Thermal Resistance and Air Permeability. Our standard classifications will be given at quotation stage or quotations can be given to meet individual classifications if required. A comprehensive log book is supplied with each door which will include operating instructions, maintenance instructions and all safety equipment details.

Optional Extras:-

• Plastisol coated laths to internal and external face.
• Galvanised steel coil casings.
• Special electrical automation and safety devices.
• Vision windows.

Send To A Friend

Print This Page

Contact Advanced Doors Limited

Request an 'Advanced Doors Limited Brochure'

Advanced Doors Limited, Park Mill Way, Clayton West, Huddersfield, West Yorkshire HD8 9XJ
Telephone: 01484 861112     Facsimile: 01484 861056     Email Advanced Doors Limited