'Firestorm & Fireblade' - Fire Resistant Roller Shutter Doors

Specification:-

• 'Firestorm' Self Coiling Operation.
• 'Fireblade II' Manual Operation.
• 'Fireblade III' Electrical Operation (3ph or 1ph).

The Advanced Fire Resistant Roller Shutter Door has been tested in accordance with BS476: part 22: 1987 (method 8) by the BRE, at their Technical Centre, (Test Report No. TE85423), and is assessed to a maximum width of 9000mm and maximum height of 7000mm to give up to 4 hours fire protection. The tested door was fitted with our controlled descent operator which was witnessed by the BRE and included in their test report. The controlled descent operator ensures the Health & Safety of personnel who may be within the closed proximity of the door when the self-closing mechanism is activated.

The shutter curtain is constructed from suitable interlocking galvanised steel laths and galvanised "T" section bottom rail, running in galvanised steel side channels, mounted on mild steel support angles which are bolted to the structure. The curtain weight is supported from a suitable steel tube barrel assembly at high level, running on steel bearings. The barrel assembly is supported between mild endplates and driven through gears. A galvanised steel coil casing is provided as standard. All mild steel components are finished in one coat of black primer.

Operation:-

Manual operation by means of continuous galvanised haul chain for opening and a pull cord disengage device to give controlled descent on closing. Due to the gearing within the controlled descent operator, the manual operation is a slow process and is designed for occasional use only.

Electrical operation is by means of a high quality single or three phase controlled descent operator. All controls are low voltage and have open, close and emergency stop button as standard. Emergency manual over ride is provided as standard to allow operation of the door in case of power failure.

Application:-

Each door is purpose-made to suit site dimensions and requirements and is suitable for all types of industrial use where up to 4 hours of fire protection is required. The door can be linked into the fire alarm system, smoke detectors or any other triggering device to give automatic controlled self-closing, or can be supplied as a stand-alone system with a thermal fusible link activating at 68ºC.

Optional Extras:-

• Galvanised operator covers.
• Early warning sirens and beacons.
• Manual re-set solenoids.
• Full auto re-set solenoids.
• Delay timers.
• Battery back-up systems.

1/2 Hour

1 Hour

4 Hour

Send To A Friend

Print This Page

Contact Advanced Doors Limited

Request an 'Advanced Doors Limited Brochure'

Advanced Doors Limited, Park Mill Way, Clayton West, Huddersfield, West Yorkshire HD8 9XJ
Telephone: 01484 861112     Facsimile: 01484 861056     Email Advanced Doors Limited